Minimalist uBITX Speaker
Description
A minimalist speaker for the uBITX transceiver. I used a 2.5 inch 2 watt speaker. Ultra inexpensive at allelectronics.com. The stereo cable with the remaining half of a cable I cut in half to make the uBITX microphone. The speaker is hot glued into the case, and the cable is hot glued to it's support block for strain relief. I used #4 5/8 inch screws to secure the back. The OpenSCAD code is included if you want to tinker with the design.
Statistics
Likes
1
Downloads
0