CR10 Mount for V6 Hotend
Description
A simple mounting bracket to enable us to mount our V6 head on the Creality CR10. Mounting has a provision for a 3010 fan and 50mm blower. The kit is designed specifically to go with our CR10 V6 modification kit which uses our Vardøger (V6) J-type Extruder Hot End Kit https://www.3dprinterspares.eu/vardger-v6-j-type-extruder-hot-end-kit---175mm-84-p.asp the full kit is available here. https://www.3dprinterspares.eu/v6-modification-kit-for-creality-printers-165-p.asp. Beta testing has identified potential issues with the cooling arrangement, I have therefore removed the 30mm cooling fan bracket and instead provide a standard clip on fan bracket in the kit. Further feedback identified a problem with the blower bracket snapping off. This has been addressed by increasing the rigidity of the vertical. REV C improves alignment of screws in the base for easier fitting and also incorporates a recess for the M3 nuts rather than a slot in the fan bracket.
Statistics
Likes
10
Downloads
0