DIY FPV Monitor
Description
If you like my work please consider following/subscribing to my feeds : [Instagram](https://www.instagram.com/ledrone.club/) and [YouTube](https://www.youtube.com/c/ledroneclub) Or you can [support me via ko-fi](https://ko-fi.com/ledroneclub) ----- This a cheap fpv monitor enclosure. It's derivated from Dialeksi's DIA FPV with the following features : * no magnet, using a 18650 battery holder. * integrated TP4056 1S charging circuit. * way uglier design You'll need the following parts : * [LCD Screen with 5.8 VRX](https://www.banggood.com/RX5808-5_8G-48CH-FPV-Receiver-with-5-Inch-HD-Displayer-Snow-Screen-Monitor-DIY-For-FPV-Goggles-p-1309235.html?p=SI190238022477201908) * [This particular 18650 battery holder](https://www.banggood.com/5pcs-DIY-Battery-Box-Holder-Case-For-18650-Rechargeable-Battery-p-965083.html?p=SI190238022477201908) * Whatever 18650 battery you have/like * [Switch (120V/6A ON/Off)](https://www.banggood.com/Wendao-MTS-101-ONOFF-AC-125V-6A-2-Pins-Toggle-Rocker-Switch-10pcs-p-1060407.html?p=SI190238022477201908) * [TP4056 charging circuit](https://www.banggood.com/5Pcs-RobotDyn-TP4056-MicroUSB-18650-Li-Ion-Battery-Charger-Module-p-1248754.html?p=SI190238022477201908) * [JST 1.25 connectors](https://www.aliexpress.com/item/20Pair-Micro-JST-PH-1-25-2-PIN-Male-Female-Plug-Connector-With-Wire-Cables-100mm/32828871896.html) * RP-SMA fpv antenna (or solder your own pigtail) The bill of materials will take you to around 30$ (for one component of each kind). ## Printing and assembly I printed it using ABS, you have to trim it a lot in order to get correct fitting (sand paper, etc.). Maybe it's easier with PLA. Beware : the LCD panel is very fragile, do not bend it or force mount it or it will break.
Statistics
Likes
35
Downloads
0