Christmas Tree Topper Star
Description
# Christmas Tree Topper Star! I wanted to design a simple Christmas Tree Star that would fit on most 3D Printers so I made some various versions. ## Versions **ChristmasTreeTopper-Whole** - Print in one piece. **ChristmasTreeTopper-Half** - Print in two peices **ChristmasTreeTopper-Quater** - Print in four pieces **Overall Dimensions** **Whole:** 7.47" x 2.15" x 7.47" [189.75mm x 54.5mm x 189.75mm] **Half:** 7.47" x 1.07" x 7.47" [189.75mm x 27.25mm x 189.75mm] **Quarter:** 3.73" x 1.07" x 7.47" [98.86mm x 27.25mm x 189.75mm] **Tree Hole:** 1.3" [34mm] max to 0.55" [14mm] min Recommended Glue for PLA: **[Loctite Ultra Gel Control Super Glue](https://www.amazon.com/gp/product/B003Y49R7G/ref=as_li_qf_asin_il_tl?ie=UTF8&tag=onlinefilamen-20&creative=9325&linkCode=as2&creativeASIN=B003Y49R7G&linkId=7c6b7c41bb278747b1cbd31a76ac7cf2)** ## Instructions If gluing, lightly sand all flat edges that will come together. This will provide a better surface for the glue to bond to. ***HAPPY HOLIDAYS AND MERRY CHRISTMAS!***
Statistics
Likes
141
Downloads
0