Lansky Sharpening System hone box

Description

Since the box of the Lansky Sharpening System only stores five hones, I needed a way to store my additional hones. This simple box design will store an additional five of them. I added some extra space in front the hones, so they can be taken out of the box easily by lifting them by their screws. <h1>Included designs</h1> Two lid designs are included: one version with the Lansky logo and one without. Pictured is the logo version of the lid with the optional backplate (the file for this is also included). <i><b>Update:</b> I added a smaller backplate for the logo. Should save some print time when not printing the lid with transparent filament.</i> <h1>Required parts</h1> Both the box and lid use six 5mm x 3mm neodymium magnets each, making for a total of twelve 5mm x 3mm magnets. If you want to cut costs, using two times four magnets (for a total of eight) will work just as well. I designed the holes for the magnets in such a way that the magnets can be press fitted, but it requires quite a bit of force (or your body weight) in order to do so. Depending on your material shrinkage, you could consider scaling the box and lid up by around 1% so you can simply glue the magnets in. <h1>Print settings</h1> <ul> <li>0,15mm layer height</li> <li>20% infill or higher</li> <li>1mm wall thickness</li> <li>No supports needed</li> </ul>

Statistics

Category

Tags