Open360 Wireless Antenna Tracker V2
Description
Open360 Automatic Antenna Tracker This is the main body frame and cover for the Open360 tracking system. It is designed to receive telemetry from your Taranis radio and send via bluetooth to this tacker. Latitude and Longitude are displayed on the 12C LCD. All components are labeled on the frame at their location on the frame. Component names and part number are included to easily identify location.All components should fit in their respective places. I suggest using pan screws at locations that are chamffered and require screws. All other components can be glued to secure in place. Buttons for Home(Left) and Calibration(Right) are 12mm momentary buttons. On/Off switch is a 20mm switch. Confifigured to house an XT60 plug for recharging only a 2S LiPo battery. This design has been configured to eliminate any external wires that would entangle around the tripod and the battery is housed within the unit itself. Other parts to this system can be found at my page here on Thingiverse. Any questions and comments are appreciated. This is a bigD Drones product and is free to use and share.
Statistics
Likes
7
Downloads
0