Coverpack for 10x Mignon / AA cells
Description
The following instruction is only useful for electrically talented people. No liability is assumed for damages resulting from this! For an existing battery holder I have created a cover to prevent the cells from falling out in case of an impact. The "high quality" battery clip I bought in the store is terrible and the cables are very thin. I decided to make my own clip from an old 9V battery. The cable outlet (2x 0.75mm²) is soldered to the shortened contacts and strain-relieved with a <a href="https://www.reichelt.de/cable-ties-uv-black-100x2-5-mm-pack-of-100-kab-u-100-2-5-p24764.html?&trstct=pos_9">cable tie</a> (a small screwdriver is very helpful for mounting in the cover - a bit tricky). At the other end of the cable I soldered a <a href="https://www.reichelt.de/dc-power-plug-straight-i-2-1-mm-a-5-5-mm-lum-nes-21-p116240.html?r=1">DC-plug</a> which fits into my devices. To hold the <a href="https://www.reichelt.de/holder-for-10-mignon-batteries-aa-push-button-halter-10xum3qdk-p8430.html?&trstct=pos_0">battery holder</a> in the cover, I stretched an office rubber band around the lower edge of the cells. Finally, I have a beautiful looking powerbank with about 12 volts (depending on the cell used). vy 73 es 55 de DH1ND
Statistics
Likes
28
Downloads
0