Anycubic I3 Mega Hotend housing /w Dragon and LED
Description
Hotend housing for the anycubic i3 mega. (First@all sorry for my bad english!) Original component cooler does not fit, an external fanduct must be used! https://www.thingiverse.com/thing:3116153 Print settings 100% filling no support printed with ABS (PLA works too) What u need: M3 screws with nuts M4 screws with nuts 3x LED´s 3x resistor for 12V electric wire heat-shrink tubing 35x35 acrylic glass coarse sandpaper Optional u can print this for better look ;) https://www.thingiverse.com/thing:2886955 Assembly Notes. - First the board with the connectors for fan power and hotend must be laid out. You have not enough space in the box with the Led. - The acrylic glass must be processed with the sandpaper otherwise you see nothing of the led light. - The 12v supply for the led I took from the hotend cooler. Please feedback in the comments original from stewi87 - Thank you very much ^^
Statistics
Likes
7
Downloads
0