Revised MKS GEN L v1.0 holder
Description
Quick Revision of this holder basically adds two symmetrical holders for 2020 profile, trims the others where thickness is a bit of overkill regarding strength and add holes + support for the hinge that was a bit fiddly in the original version. The holders can be used to mount this box on the other side. I do not intend to mount it on that way but I was going to add support for the upper part, so I thought more is better. It is an open build therefore precautions must be taken regarding electric wires to avoid shorting that would damage the electronics or if used with AC equipment, could also harm the user. UPDATE: Just for fun a standalone mount version. it only mounts on one side. You could with a lot of work and tests make a mount on the side and the middle bar, but I do not think it is worth it. The board should be stable as is. Indeed, if you decide to use the standalone version it would require some sort of stands or feets that raise the TT of at least 50 mm above the platform. These for example should work fine https://www.thingiverse.com/thing:3201498. There is a special version for Tevo Tornado. Update: Standalone version updated and corrected to work with the original cover
Statistics
Likes
2
Downloads
0