Battery Mount for QAV Piko 2 Inch Micro Quad
Description
The QAV Piko 2" micro frame is great, except the method employed to hold the battery. A rubber band is used and wrapped around the battery and engages two "ears" on the frame. Removing and replacing the battery was an exercise in frustration for me. So I designed this extremely light weight and strong solution. Weighing in at less than 1.5 grams, this mount holds the battery perfectly, and is very easy to put on and take off. One change is instead of the supplied silicone pad to cushion the battery, this mount requires ZEAL vibration absorbing sheet. This sheet is excellent and is sticky, so it will stay on the frame and also temporarily hold the battery in place while removing or replacing the mount making things much easier. I am really proud of this design, because it is simple but extremely good for what it does, and it is a HUGE improvement over the stock approach. I supply three different height mounts, which needs to change based on battery overall thickness (height). The tallest is the Tattu 3sx850 mount which is designed for a 23.4mm thick lipo. The medium one is the NewBee 3sx350 which is designed for a 17mm thick lipo. The shortest is the Tattu 3sx450, which is designed for a 14.3mm thick lipo. (All when using ZEAL sheet) If your battery is very close to one of these thicknesses you can use one of these files. If you have other thickness lipos that you would like a mount for, just add a comment with the thickness of your lipo. Remember the dimensions of these mount expect you to use ZEAL sheet, which is 5mm thick. If your pad is different, make sure to mention that dimension as well in the comment.
Statistics
Likes
3
Downloads
0