Reptile S1100 Harrier Detachable Motor Mounts
Description
These are detachable motor mounts for the Reptile S1100 Harrier flying wing configured for twin motors. UPDATE - added 16x19 mounting pattern STLs. Renamed original STLs 16x16. Oriented for SunnySky motors to have the cable at bottom to fit recess. Other motors may vary. Contact me if you need a specific pattern. Inspired by the mounts from StuntDouble but designed from scratch, so this is not a remix. The StuntDouble mounts required some removal of foam from the rear of each nacelle - these do not. These mounts weight slightly more but are significantly thicker and provide a full-coverage bond between the backplate and the foam of the nacelle. Requires 6 x 5.5mm / M3 hex nylocs for the rear of the backplates, and M3 bolts for both the motors and the motor mounting plates themselves, of appropriate length. I believe 12mm will do the trick. The mounts have a 16x16 mounting pattern for the most common 'multirotor' motors. If there's enough demand, I may put up a 16x19 version to accomodate other motors. I used T-Motor F80 Pro 2200kv on my build. Use contact adhesive such as UHU Por to bond the backplates to the nacelles, making sure to install the nylocs first! Lastly, print two of the Recess Plate and bond to the foam in the middle - this part is optional since they won't be seen once the motors are bolted on.
Statistics
Likes
9
Downloads
0