Direct to Bowden adapter M6x1.0/0.8
Description
I forgot to buy an adapter with my bondtech so this was born. Its for 1.75mm filament hole diameter is 2.5mm so depending on your printer you might need to drill it out. Threads are m6x0.8 and m6x1.0 with a depth of 6mm. Begining of threas is recessed 1mm to to allow threads to go deeper giving extra strength when mounted in the extruder. Tip. If your threads fail you can just drill them out with a 5.5mm drill bit, take care to drill perpendicular with the adapter or the filament might snag. Easiest way i have found is to drill by hand holding the drill bit in your hand.
Statistics
Likes
11
Downloads
0