Bruder Delta Drive System
Description
took a nice design and modified for my needs.designed motor mounts to house the common china 16mm gear motors available from 50-300 rpm.ive used the 150 rpm and found it was plenty power and scale speed. motor mount are a cap design that squeezes the motor into place. modded the hub to allow the planetary gearset to be recessed inside the hub and accept a common 3mm d shaped shaft. the motor stand slides into the stock bruder frame,its designed if tracks ever stretch you can raise the entire motor section and ad a shim to increase tension on both motors evenly. on the drive drive hub after printed clip off the small standoffs between the cogs.....this a great design in stock form. i printed petg 100% infill
Statistics
Likes
80
Downloads
0