Wemos D1 R1 Mounting plate
Description
Just wanted a simple mounting plate that I could use standard M3 screws on. Just print in PLA and use M3 screws with a little pressure to cut the thread into the printed mounting plate. One screw you may need to "turn down" the head a little to use. I use a drill and mount the screw in the chuck, then I hold the head up against a grinder until it is small enough. That screw may have sharp edges so make sure you use some sand paper to smooth it out before you screw it into the Wemos to avoid it cutting into any leads.
Statistics
Likes
1
Downloads
0