FlyingBear P905H Power Supply Cover
Description
The casing for the power supply with a separate backlight control and turning on the printer, a place is provided for mounting the 5 volt relay module to automatically shut off after printing is completed. Link to the original article on automatic shutdown http://3dtoday.ru/blogs/3ddelocom/budget-system-the-printer-turns-off-automatically/ Motherboard MKS Gen v1.0 L in firmware I edit Configuration.h #define POWER_SUPPLY 2 pins_RAMPS.h #define SERVO2_PIN 12 #define PS_ON_PIN 5 Additionally, you will need: 2 x IRS-1-2B switch 1 x SB570 button 1 x power euro plug 1 x relay modul
Statistics
Likes
7
Downloads
0