Bixler motor mount 7deg offset 25mm Mod
Description
I Remixed the original Thing to fit all TURNIGY D28XX Motors. I tested it with the TURNIGY D2826 and the TURNIGY D2836. On my Bixler 2 V2 I can easily fit a 10" Prop on the Motor. I also modded the Thickness of the mount because the original broke at the mountingholes of the motor. Its now 2mm thicker than the original. To mount the motor you need 9x3mm screws, which you can cut from a longer one.
Statistics
Likes
10
Downloads
0