Lowrider2 Makita RT0700C Plate and Vacuum Shoe
Description
This is an alternative version of the lowrider2 plate and vacuum duct for the Makita RT0700C or RT0701C router with its included holder. The 3d printed parts are drop-in replacements for VacDuct.stl and VacShoeTop.stl. VacShoeTop fits together perfectly with the original VacShoeBack.stl and VacShoeFront.stl, while sitting snug next to the Makita instead of the DeWalt that the original parts were made for. The VacDuct part snaps into place in the factory router base for the Makita (see pictures). Same as the original part it redirects the router's exhaust air away from the intake of the vacuum shoe. Note that the router base's clamp is hitting the vacuum hose bar. There are two options: 1) use the provided hose brackets which are high enough to clear the clamp 2) flip the clamp on the base itself to open the other way In addition to my own lowrider, there have been a couple of folks on the V1 forum who successfully tested it. One even used it with one of the Katsu or Anesty knock-offs. See [this thread](https://www.v1engineering.com/forum/topic/all-necessary-modifications-to-work-with-a-makita-rt0700c-or-rt0701c).
Statistics
Likes
113
Downloads
0