Skin Tag Remover Device
Description
Designed this because I couldnt see paying $20 for the real device . Pictured are the rubber bands I think fit these best because of their size and price. Link provided . If you found this device , then you know what it can be used for . Removing skin tags . Printed these separate . No support . PLA . 1/8 size bands 3.5 thickness https://www.ebay.com/itm/100-Dental-Rubber-Bands-Orthodontic-Elastics-Braces-1-4-1-8-3-16-2-5-3-5-4-5-oz/122288622382?ssPageName=STRK%3AMEBIDX%3AIT&var=422775597608&_trksid=p2060353.m2749.l2649 You may need to go with a different size applicator or bands , these just seem like a basic size. To apply : !,) put rubber band over the tip of the applicator and slide it all the way down to about a 1/4 inch of the wide end. 2.) Place the wide end over the skin tag . 3.) Take the other piece (angled bar ) and slide it down the applicator until you are pushing on your skin . 4.) Push it down and pull applicator up at the same time 5.) remove the angled bar and the rubber band should stay over the skin tag .
Statistics
Likes
19
Downloads
0