Realistic base
Description
Realistic base I designed in FreeCad for the 1:200 version. Has a back space for an arduino nano and cables, a lateral hole for a button (12mmx12mmx3mm, came in the Arduino starting kit), a top hole for a LED (where a cottage will be placed). All holes (button, LED and wind turbine) end up in the arduino nano space. Cables were soldered to the board. Programmed a simultaneous blinking with different patterns for both LEDs. Motor was soldered to the 3.3v pin and ground. Both LEDs have a resistance (330 Ohms) in series. Button is pull-down (if I remember correctly, so 10 kOhm resistance is connected to ground). Back cover needs 2.5mmx10mm screws. Added the following elements to the base: 1. Cottage over the base LED: https://www.thingiverse.com/thing:981780/files 2. Trees: https://www.thingiverse.com/thing:2746947 https://www.thingiverse.com/thing:2807576 https://www.thingiverse.com/thing:3094902
Statistics
Likes
5
Downloads
0