NERF BIGSHOCK HEAVY BARREL
Description
hello there ! this is a kit that extends the barrel for the nerf bigshock to make it look better, even for a really cheap blaster... this doesn't increase fire power, just gives you about one extra meter of range ... this is a reaally easy thing to print so you should give it a try ! installation instructions : this should be a drop in kit but some sanding may be required to make it fit nicely on your blaster :) you'll need : -1x M4/M5 screw (M4 is the best) -1x Maching nut (m4 if you got m4 screw & vice versa) -1x Matching screwdriver (quite long is the best) -1x the printed piece -1x Nerf bigshock -1x sanding paper ( not useful in most cases) -step 1 remove supports ( if present) -step 2 press fermly the printed piece against the front of the gun while keeping everything in line -step 3 insert the nut in his slot on the top of the printed part -step 4 insert the screw through the storage hole through the front face of the nerf -step 5 tighten the screw -step 6 you are done ! GG ! don't forget to add a "make" if you printed this !
Statistics
Likes
4
Downloads
0