Speaker Grid with Name
Description
A speaker grid for the boom boxes of my two daughters (see https://www.thingiverse.com/thing:3318852 for the build). The default diameter of the M3 holes is set to 96mm - the grid itself should cover an 8 cm speaker without problems. Use the m3test.stl to check if the generated M3 mount comes out correctly on your printer. Note: OpenSCAD needs about 10 minutes to render the model (at least on my laptop) Use the following values for a Visaton FRS-8 M (mounting holes are aligned with the speaker): OUTER = 84; N = 9; DIA = 15; WALL = 3; BORDER_DIA = 12; M3_HEAD_BOTTOM = 3; M3_HEAD_DIA = 6.5; M3_HOLE_DIA = 3.8; A blank version of the speaker cover for a Visaton FRS8 M can be found in the files section.
Statistics
Likes
33
Downloads
0