arduino/protoneer to thb6064ah stepper controller/driver mount
Description
DRIVER MOUNT BOX I designed this so that I wouldn't have to use much wire to attach all the stepper drivers on my 3 axis cnc router to an arduino uno. I like the thb6064ah chips but they mounted differently then the original ones I used. thats why I designed this control box. with this mounting system I can use one fan to cool everything. You may have different drivers that use different dimensions. feel free to alter the dimensions however you need. I used pet+ plastic but you could use any type of rigid filament to print this. I hope someone finds this useful. UNOMOUNT2 The model in my photo did not have the proper orientation of the arduino mount posts. I rotated them in the file so the usb port on the uno board would be oriented toward one of the wire openings. If that doesn't work for you you can break off the posts and use the unomount2 model to put the uno board wherever you want it! CAP Something that would be nice to have along with this design would be a dust shield/lid to cover the fan and bring the air in from the sides of the cover through some kind of grill. well....I decided to design a cap...its not complex but it does work....someone else could do a better job but this will work for me, I printed it in pet+ on it's back (upside down) PLUG POST i use the four pin type you would find on a pc power supply this is a handy way to anchor the plugs to ensure good connection
Statistics
Likes
1
Downloads
0