KeyForge Deck Box
Description
Do you keep mixing up which KeyForge decks are in which boxes? This box uses a top loader (thick card sleeve) to turn your Archon card into a lid so you know what’s inside. Designed specifically to fit an unsleeved 36 card KeyForge deck. Tested out with Ultra Pro Regular Toploaders (#81222). **A Note About Height:** The design assumes a layer height of 0.18mm and a first layer height of 0.27mm. The back of the box is set to be two layers thick. This has worked for the PLA+ that I tend to use but I’ve seen some comments from others that it’s too thin. If you’re finding that’s the case, use the Customizer / OpenSCAD file to add another layer or two. *Update 1:* Per request, I’ve included a version that’s sized to hold sleeved cards. The spot for the cards measures 67mm x 92mm x 28mm. I haven’t tested it myself (and sleeves do vary) so let me know how it goes. *Update 2:* I’ve included an OpenSCAD file that you can modify to adjust dimensions for your sleeved cards, put text along the side, or add more thickness to the bottom if your printer / filament needs more than two layers. The OpenSCAD file is slightly different from the .stl files, which were originally exported from Fusion 360.
Statistics
Likes
71
Downloads
0