AirHockey striker and puck
Description
Replacement airhockey striker and puck. Dimensions Striker: 69 mm diameter, 50 mm height. Puck: 35 mm diameter, 3 mm height. Printed well in ABS with 0.2 mm layers and 0.4mm nozzle without raft or brim. The puck does print without support if your printer is somewhat good at bridging, it will however not be the most pleasant to look at if viewed from underneath. It's recommended to slide the puck over some sandpaper on both sides to get a uniform flat surface. Also attach some fabric to the bottom side of the striker to have it slide easier and avoid scratches on the table.
Statistics
Likes
12
Downloads
0