SFG case for Yamaha MSX computers (for RBSC's board)
Description
This is the case for the RBSC's SFG module's clone. The Yamaha's network module's case was used as the source of this design. The SFG module can be inserted into the side slot of Yamaha MSX computers: YIS805, YIS503 and similar. The case and the bottom cover must be printed separately. Both parts must be printed with Brim and with their open side facing upwards. Included are also the front panels (thin and thick) for this SFG module's case. They could be attached to the original Yamaha's network module's case if it is used to host the SFG module. Four 3mm x 20mm screws should be used to attach the bottom cover to the case. The SFG project can be found here: https://github.com/RBSC/SFG_Clone If you want to make a small donation in appreciation of my humble efforts, please use the "Tip designer" button on this page: https://www.thingiverse.com/Wierzbowsky/designs
Statistics
Likes
3
Downloads
0