Aero "Evolve" for Tevo Tornado,Flash/ Creality CR10,s,Ender3/ Prusa Mk3
Description
<font size="6" color=brown>Titan Aero "Evolve"</font> ***** ***** <font size="4" color=brown>CFD Simulation</font> <iframe width="560" height="315" src="https://www.youtube.com/embed/ZpmIAKCVlZs" frameborder="0" allow="accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe> ***** 6.21.19 New adapter mount for the TH3D EZABL Pro bed leveling sensor. Thanks to member Heffe2001 for the model. ***** Nice installation video made by Youtube user "3d-Hobby" <iframe width="560" height="315" src="https://www.youtube.com/embed/MA4vvs4cd8Y" frameborder="0" allow="accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe> ***** We have engineered a cooling mod that is taking the Titan Aero to the next level. We call this the Evolve. As with all our mods, we developed this using enhanced CFD simulations and incorporating features that have proven successful from our popular Petsfang v2 and Bullseye designs. With over 400 hours of testing on 3 different platforms we are ready to offer this to the public. <font size="5" color=Orange>View Our "EVOLVE" Playlist Here</font> https://www.youtube.com/playlist?list=PLrSJ-TZuC69w3KfMJd7eNluhF5yCLWXl2 <font size="4">Some of the features setting this apart are a one piece mount/duct for the Titan Aero that accommodates both the E3Dv6 and the Volcano heat block in the same print. We solve this with elongated mounting holes, in the base, for either heat block. This keeps the whole part very solid and allows for a very tight, vibration free mount to the back plate. </font> <font size="4"> Our new duct outlet profile provides greater coverage of the filament and has a 50% longer dwell time over the filament for cooling, allowing for increased overhang performance at higher extrusion volumes. With the increased velocity we have added segmented outlets extending into the plenum to reduce high pressure areas within the duct outlet giving a more balanced flow across the outlet.</font> <font size="4"> Most of our testing was .3mm layer heights with a .6mm nozzle. The CFD simulations allowed us to optimize the outlet velocity to keep a greater distance from the nozzle and allowing for a smaller plenum. This still allowed the converging airflow to exit to the back of the build pate which has proven to be very successful with all the Petsfang mods, keeping fresh air and lower turbulence on the filament.</font> ****** <img src="https://cdn.thingiverse.com/renders/de/e7/00/88/53/5fe91a394259a0927556996a062047d6_preview_featured.jpg" width=600 height=400> ****** <iframe width="560" height="315" src="https://www.youtube.com/embed/FGTYpfG3toE" frameborder="0" allow="accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>
Statistics
Likes
343
Downloads
0