Pro D&D Case V4
Description
Updated Version!!! After Testing out the old version with my Gaming Group... We all agreed that The Case needed more space!!! The height and width has been increased to accommodate for more pen/pencils, More Space for Larger 25/28mm Miniatures and MORE DICE!!! (around 4 sets) ---------------------------------------------------------------------------------------------------------------- The Ipad/Tablet Stand was Slightly edited in Tinkercad to put holes in the back for the magnets (Original Stand Design below - Not mine, i just Modded it!) - - - https://www.thingiverse.com/thing:1769212 - - - ---------------------------------------------------------------------------------------------------------------- After Finishing the Print (not in the Pics) I Cut and Glued Black Felt to the top of the lid to make a dice tray for rolling - this was a design need to save space when your at the Gaming Table! ---------------------------------------------------------------------------------------------------------------- You will need Ten 1X3mm Magnets for this build, 4 for the Lid, and 6 for the Tablet Stand! Possible Issues... - Over extrusion will cause the lid to not slide in properly - reduce your extrusion rate! - Over extrusion will cause the Stand Cover to not fit - reduce your extrusion rate! - for both issues above, you can sand down the sides to help fit if you dont want to refit! - both the lid and the stand cover have been custom fit to compensate over extrusion, - if you have no issues with over extrusion - increase the X axis by 1-1.5 % This is a free Design for the Community to create, sell and Mod as you Please! - https://www.tinkercad.com/things/dnL7yfnib7y-pro-dnd-case-v4/ - - Happy Gaming - Berko
Statistics
Likes
125
Downloads
0