E3d V6 hotend mount for Prusa i3
Description
A all-in-one bowden e3d V6 and Lite6 mount for geeetech i3 type x-carriages (like this one: https://www.thingiverse.com/thing:1643930) The fan shroud is asymetrical making it possible to rotate the hotend with the wires facing backwards, like this it's possible to route the hotend wires neatly trough the slot in the mounting bracket You'll need 12 15mm self tapping M3 screws for the fans and 2 8mm self tapping M3 screws for mounting the fan shroud to the hotend mount(regular m3 screws will also work, just not as reliably) and 2 30 mm regular M3 screws and nuts for mounting the bracket to the x-carriage I reccomend printing in ABS op PETG, put PLA will likely work as well. The fan grills used in the picture: https://www.thingiverse.com/thing:2802474 If you'd like to see mounting options for other printers(or other additions/changes), let me know so I can edit the base part
Statistics
Likes
15
Downloads
0