Thermaltake P5 - 480mm Rad Brackets
Description
UPDATE: These things have been printed and tested for fitment. Thanks, NinjaPrototype and NeuroMortis! This pair of brackets will allow you to suspend a U-flow 480mm radiator between two of the window-mounting corner posts on your Thermaltake Core P5 chassis. They should allow you to place your rad on the top, either side, or even the bottom - assuming, of course, that doesn't impede any already-mounted equipment. You will need to print BOTH of these files to mount a rad. One side is meant for the endtank end, and the other side is meant for the terminal end. The rad is offset by 10mm from the centerline of the case so that the fittings and tubing on the terminal end do not impinge on your mounting post. These brackets sleeve over the stock posts and will still allow you to use the window once installed. They slide on the posts, which means you'll be able to tuck your rad up tight to your case, or have it out closer to the window if you like. These can mount to the fan side or the radiator side of your "sandwich," but as they are 5mm thick you may need to custom cut some screws for the correct length if you bolt them to the rad. If you do download and print these, PLEASE leave feedback! I'd love to see them in use on some builds!
Statistics
Likes
14
Downloads
0