Lulzbot Mini 2 Raspberry Pi Mount (For OctoPi)
Description
Reconfigured the mounting tabs for the Raspberrry Pi case from CoreElectronics for use on the Lulzbot Mini 2 printer. The case now uses the two front bolts on the lefthand side, which only hold on a small bracket for a ribbon cable. I tried to use the existing part with the other holes, but the bolts ran into the printhead gantry..whoops! I wanted to piggyback on the least important bolts, in case they loosen or anything. Cables now rearwards (except power cable plugs into the top). I replaced the stock bolts w/ 10mm long M3 ones (didn't have them in time for the picture haha). Thanks to CoreElectronics, nlaredo, and 0110-M-P for the original design.
Statistics
Likes
5
Downloads
0