Daisy Pumpmaster 760 Laser Sight Mount
Description
Simple barrel mount for a laser on a Daisy Pumpmaster 760. It uses this laser pointer from Amazon: https://www.amazon.com/gp/product/B077LTTVLW/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1 It's a very tight fit. I printed in ABS and thought it might be a little small, but ended up working just right for me. Put the big end over the barrel and then push the mount onto the gun barrel, but not all the way. Do the same on the second mount. Then slide the laser into place and then snap the entire thing into place. Mine clicked on and was very snug. These lasers do not point straight. I just spun mine in the mount until it was at the right level horizontally. Then shift it left or right to line up with your sight. I used M3 nuts and bolts to clamp it on tight once I had it sighted in. Just drill out the pilot holes to whatever size bolts you use. Once set up mine is right on target at around 50 feet. My Daisy has an 11mm barrel. Will probably fit other pellet and BB guns.
Statistics
Likes
21
Downloads
0