10mm and 12mm Adapters for Lee Bullet Feeder
Description
This is designed to work with a LEE bullet feeder and the Open Bullet Feeder by AmmoMike. This goes from the tube after the spring to the bullet die. Also designed to have a 12v LED to use as a easier way to see darker bullets like Blue Bullets. Designed to sit loosely. This is used in my OpenbulletFeeder- DIY Bullet Feeder build: https://www.thingiverse.com/make:578974 UPDATE: The original 10mm version is made to fit all bullet sizes smaller than 10mm because 10mm bullets are slightly larger than 10mm. I have made a 12mm version meant to work with 10mm bullets and possibly up to .458 bullets. (.458 wasn't tested) You may use the 12mm version with bullets smaller than 10mm but there is a chance that they may get stuck in the adapter by going sideways. I recommend you use the 10mm version for smaller sizes and 12mm version for larger sizes. If for any reason you need a larger adapter, just ask in the comments.
Statistics
Likes
12
Downloads
0