J-struder flex mod
Description
 ___________________________________ J-struder flex mod ------------------------------------------------------- ______________________________________________ [](https://discord.gg/nHr7RV5) __________________________________________ [](http://bit.ly/2LMBt19) [Polish shop here.](http://bit.ly/2Xu2uIA) __________________________________________ [](https://www.facebook.com/3DPrintSlav) ____________________________________ [](https://paypal.me/BlackHideki) ______________________________________________________________ Check out my SlavStruder, Its more beefy, less wobbly and a bit more durable than jstruder. Also is already with tight extruder path to help with flex material https://www.thingiverse.com/thing:3437372 A simple mod that restricts a path that filament is going trough so you can print flex on a bowden setup. Its only a filament guide part, you need to download a base from original source: https://www.thingiverse.com/thing:3070890 Capricorn xs or simmilas advised. After printing (preferably with 5+ walls and 80% infill) you need to sand down a place where extruder gear will be located, it is made oversized on purpose so you can sand it down a bit at a time so that extruder gear does not rub on it but it still is as tight as possible. I printed in pla but abs or other stronger material advisable.
Statistics
Likes
47
Downloads
0