Red Solo Cup dispenser
Description
You need 1 "body" and at least 2 "blades" to catch the cups so they don't fall. No scaling necessary unless your solo cup diameter is over 100mm. Print time is very short. Great for team sports, parties, and kitchens! My Red solo cups didn't fit into the original model so I remixed it. It's 3% wider so the cups can actually go through the hole without cracking from being bent too far. Also, I lowered the height by 30% since it doesn't need to be that tall and take an extra hour to print. This dispenser fits cups up to 100mm in diameter as seen in the photo. For 98mm cup rim I use to two blades only, for 94mm cup rims I use all 3 blades. actual dimensions of the large part: diameter 110mm, height 59.5mm FILES: <b>remix_-_Cup_dispenser_body_v2.stl</b> this is the main body part of the cup holder <b>Cup_dispenser_blade_v2.stl</b> This is a single blade, you'll need 2 or 3 depending on how tight the fit is. <b>FINAL remix_-_Cup_dispenser_body_v2.stl</b> : this one is the same as the first one "remix_-_Cup_dispenser_body_v2.stl" but I ran it through makeprintable.com in case u encounter any errors or problems with the .stl <b>remix_-_Cup_dispenser_body_v2.svg<b/> .svg file in case u prefer to modify it in that format
Statistics
Likes
123
Downloads
0