Rev Limiter Indicator case - Sim Racing SimHub
Description
Could not find one on here, so figured I would make one to post. Basic design with no pegs to help align the LED board (they typically just break off anyway when that small). Position LED over holes and then secure with hot glue or superglue. I used two WS2812 5050 RGB LEDs (https://www.amazon.com/gp/product/B06XGT9ZSL/ref=oh_aui_detailpage_o02_s01?ie=UTF8&psc=1) to make this, and connected them up to an Arduino Nano. The assembly is held together by two #2-56 x 1/2" machine screws. To finish off I also cut some smoked/tinted acrylic sheet to make the LED's easier on your eyes (https://www.amazon.com/gp/product/B01A1C16TK/ref=oh_aui_detailpage_o02_s01?ie=UTF8&psc=1). I also made a mount for the Thrustmaster T300 if you need a way to attach to your wheel. Here are the links: https://www.thingiverse.com/thing:3302109 https://www.thingiverse.com/thing:3302092 (this one is optional, you can definitely just superglue the mount arm linked above to the OEM plastic on the wheel to achieve the same result)
Statistics
Likes
165
Downloads
0