Mini Talon Wing Extension 150mm

Description

After some final testing, the wingextensions for the Mini Talon is here :) Extend the wings of totalt 300mm, making the total wing span 1600mm. Remember you want this as light as possible - Mine is about 80grams each which should be no problem. The "lockers" stl file should be printet twice, and glued in place with superglue. (See pictures) The BackCarbAdapter.stl file have to be printed if you are going to use the original 4mm back spar. Then just glue them in the hole for the back spar.. You would need longer carbon rods. Carbon rod 1: Outer diameter 10mm - inner diameter 8mm Carbon rod 2: Outer diameter 4mm - Inner diameter doesn`t matter. How did I print it? ------------------------- Im printing with Simplify3D using "multiple processes" If you dont know how to do it, check out this video: https://www.youtube.com/watch?v=OcddlK36OVs&t=266s My settings ------------------- I made 3 copies of my standard print process. Print (1) - Print (2) - Print (3) Print (1): -------------- Infill: 10% Top Solid layer: 2 Bottom Solid layer: 2 Outline perimeter shells: 1 Stop printing at height: 2mm Print (2): -------------- Infill: 3% Top Solid layer: 2 Bottom Solid layer: 2 Outline perimeter shells: 1 Start printing at height: 2mm Stop printing at height: 148mm Print (3): -------------- Infill: 10% Top Solid layer: 2 Bottom Solid layer: 2 Outline perimeter shells: 1 Start printing at height: 148mm Layer height is set to 0.2mm with print speed at 50mm/s Print time was about 8,5 hours pr extension.

Statistics

Category

Tags