Raise3D N2 - Quad Fan Upgrade
Description
**SUPERSEDED: https://www.thingiverse.com/thing:3440161 As you may notice there should be two free fan plugs on Raise3D N2 printers which can be used for the additional two fans. May require some gapping for the limit switch but I will update where necessary. Print: - 1no. Quad Fan Air Duct - 4no. Fan Cover Additionally Requires: - 2no. 35mm Axial Fans - 6no. M3 x 10mm Socket Head Screws (Duct to Extruder Housing) - 8no. M3 x 20mm Socket Head Screws (Through Fan & Cover)
Statistics
Likes
8
Downloads
0