Transformers G1 Perceptor Rifle Weapon
Description
I have acquired plenty of Transformers over the years and many are broken or missing parts. I'm new to 3d printing and just now learning Fusion 360. Another guess for a part. I traced the best looking picture that I could find for Perceptor's rifle and just modeled around it. It's only one side, makes it so much easier to print this type of thing. On the original, one side was hollow anyway. Just mirror it in your slicer to get the other half. Take a good look at it in the slicer before you print it to make sure you mirrored it and not just rotated it..... In the picture posted, the two halves are not even glued together, just plugged into the hand. Hope someone can use it. :-)
Statistics
Likes
22
Downloads
0