Printing nozzle wipe code gcode (Dremel D3 3D45 3D40 3D20)
Description
This is my gcode to do a nozzle wipe before printing using a Dremel printer. It is configured to start at the bottom left and do a filament wipe on the Y-axis up 80 mm (from -40 to 40). The starting and ending wipe positions can easily be modified. To use this gcode, in Dremel DigiLab 3D Slicer go to Settings / Printer / Manage Printers. Click Machine Settings on your printer and place the wipe gcode after the Start Gcode text. Tested on a Dremel 3D45. See the screenshot and look at the left side of the buildplate to see the nozzle wipe result. ; wipe code G92 E0 G0 F4000 G0 X-115 ; set wipe start x G0 Y-40 ; set wipe start y G0 Z1 G0 X-115 Y40 F1500 E25 ; set wipe stop x and y G92 E0
Statistics
Likes
23
Downloads
0