FLSUN Default Sensor Mount for 4mm Glass Bed Mod
Description
FLSUN Default Sensor Mount for 4mm Glass Bed Mod I have the FLSUN C Plus but it works on their smaller I3 printers as well. I have the stock Blue Metal sensor for auto leveling but I wanted to use a glass bed as well. The glass bed I have is 4mm thick and I thought I would need a new sensor. Turns out I just needed to mod the sensor holder to slide it down a little so it senses the bed closer to the actual nozzle height. This is tested working! - Works with stock "blue" metal sensor from FLSUN - Works with a glass bed up to 4mm thick - TESTED Working! NOTE: On my printer I used longer M3 screws so I could tighten the sensor to the screws with M3 nuts and then put the sensor onto this part and add more M3 nuts to secure it.. this allowed for less wiggle room once I had it all set up.
Statistics
Likes
6
Downloads
0