Total Nuclear Annihilation (TNA) Sub Port and Plug
Description
This is made for a TNA pinball machine but would work on any speaker enclosure with a 50mm port hole. Print the port and the plug at 0.2 layer height. You'll need to cut the screening inside the port hole, you only need to cut half of it you can push the rest of it inside when you push the port in. I've found this has increased the quality of the sound from the Sub, it could still do with some improvements such as actually sealing the enclosure and adding some sound deadening material inside but this is a good improvement.
Statistics
Likes
8
Downloads
0