Blade Guard for Vivosun 6.5" Straight or Curved Pruning Shears - STL and Fusion 360
Description
This is a blade guard for the Vivosun 6.5" straight shears found at the link below. This design should also work with the curved version though I don't have on on hand to with which to validate. https://www.amazon.com/dp/B01EWH83FU/ref=twister_B00PVARUM0?_encoding=UTF8&psc=1 These guys are pretty pointy and sharp so I wanted to keep them, and myself, protected as they rattle around my work box. This gives a good fit that wont come off accidentally but is easy to sheath/unsheath. This was designed with widths/thickness in increments of 0.4mm to match the extrusion line width on my my and most 3D printers. Therefor you can use 0 infill, up the numbers of walls to 4 and top layers to 8 and get a solid unit made just of walls. Use the print orientation provided with a brim of 5-8 lines just to give the legs extra stability while printing. Enjoy!
Statistics
Likes
14
Downloads
0