Camera mount slideable on to the Y-carriage for Lack Enclosure
Description
I'm printing the https://www.thingiverse.com/thing:2821348 for the printers right side, Since I have bed leveling with lock nuts instead of the default spacers I wanted to use the sliding version from Aneurin instead which I had to mirror on the Y axis. I knew it wouldn't fit inside the Ikea Lack Enclosure so printed PLA first and noticed 2 problems. 1 It hit the front brace slightly and the Y rod zip fully so the bed couldn't move 2 It was too long like mentioned before by others. My solutions 1 Cut 10 mm off the slide on side 2 Cut 45 mm from the arm which should be just enough I hope The new parts fit well in PLA for testing so now printing them in ABS because I'm out of black PETG and still awaiting the delivery of Prusa Orange PETG. Edit: Default orientation is for the left side, To use it on the left side mirror allong Y axis.
Statistics
Likes
0
Downloads
0