Reckhams Delta Smart Effector 5015 tornado fan blower mount, VOLCANO version
Description
Because there are not that many smart effector 5015 blowers and I wanted to print more with PETG, I decided to make my own blower. The 5015 blower is mounted similiar to a Tevo Little Monster Radial Blower, but has a lot more power. Very nice for PETG to avoid stringing. <h4> For printing temperatures around 205°C I recommend a cooling fan speed of about 35% and fan speed of 0% for the first layer.</h4> <h1> UPDATE: </h1> <h4>30.12.2018:</h4> - added improved version v2: - 3mm lower, better mounting and much lighter <h2>Setup:</h2> - You might need to drill the holes in version v1 for the effector screws a little because they might be a little to tight. - The blower need so much power that they all need at least approximately 33% fan speed. At 100% you have a pure storm of fans that cools your prints within seconds. - <h4>PID tuning </h4> recommended. For those who don't know who to perform it, try the following macro for H1 (=nozzle heater; use h0 for bed heater) <blockquote> <h4> M303 H1 S250 ; auto tune heater 1, default PWM, 250C target or maximum temperature </h4> <h4> M303 ; report the auto-tune status or last result </h4> <h4> M307 H1 ; see the result</h4> <h4> M500 ; save the result in config-override.g</h4> </blockquote> Thanks to @LeeIIIWill for the Smart Effector F360 model what made it pretty easy to configurate a good blower: https://www.thingiverse.com/thing:3229215 Feel free to remix it. I uploaded the F360 File too.
Statistics
Likes
13
Downloads
0