Ender 3 Y Axis Motor Damper Fix (Non Removable Gears)
Description
UPDATE: New Model Added! I've created a stronger and thicker model! If you find that there's some inaccuracies when printing or just want a stiffer structure, print the thick model at 100% infill! Recommended if you don't mind the longer print times and the slightly closer surface to the belt. You can still use M4x20 screws although something larger should work as well. Simple adjustment for the original Y Axis Damper, adds gap for the motor damper. The model should be accurate enough to get a good fit, but you can add additional washers to the damper/chasis depending on how well the pulley and belt runs. I recommend using M4x20 screws for attaching this to the bar instead of using the original screws that barely fit on to the chasis. Screws are also needed to attach the motor damper to the motor/chasis. They should come with your dampers. Watch out for the motor damper. Its hole MUST be larger than the pulley and if it has two little protruding bumps, they need to be filed off.
Statistics
Likes
11
Downloads
0