REAL filament spool holder 2020 / 3030
Description
**I made this thing for myself. However, if it helped you out, please consider a donation via http://bit.ly/Bart3d or the TIP DESIGNER button.** There are many similar spool holders like this one, however I needed one specifically for my REAL filament spools. These are cardboard spools that dont work with the similar spool holders, because the REAL spools have a thin edge on the outer sides. The spacing of the bearings is made specifically for REAL Filament spools, but will also work with other brands. For REAL Filament spools you will have to use F608ZZ bearings. This spool holder will hold 500g or 1kg REAL filament spools. Use the corner spool holder to eliminate any effect of the weight of the spool on the frame. You can also use bearings without a flange for other types of spools. With normal bearings, the max witdh of the spool is approximately 85mm. If you need a filament guide, I made a very simple one: https://www.thingiverse.com/thing:3318389
Statistics
Likes
24
Downloads
0