Steering Knuckle Left and Right for 1/14 scale nikko rc car
Description
This is a Streering knuckle made for 1/14 scale rc car (Nikko) : -For this part you will need a metal bar (axe of the front wheel). -Print with a 0.4mm nozzle in PLA. -You might have to adjust the two holes for the steering bar and the axe of the wheel. -Layer Height : 0.08mm -Print speed : 30 mm/s -Travel speed : 80 mm/s -Designed on CatiaV5 Have fun!!
Statistics
Likes
10
Downloads
0