ZE CR10 Filament Sensor Guide
Description
This filament guide is designed as a casing for the CR10 filament sensor. This is a two-piece assembly consisting of what I'm calling the "CR10 Filament Guide" and "Sublogo Cover." Feel free to personalize the Sublogo Cover by placing your initials or small logo. This design was chosen for its feature to use the existing two small screws from the CR10 as fasteners. Thus, increasing the stability of the filament guide. This component also features a wire harness channel, CR10 filament sensor crevice, and M3X8 fastening holes. In addition, an edge fillet was placed around each filament entrance for ease. I actually used this without a cover and liked how you can see the blue LED light from the CR10 filament sensor. However, in my opinion, it looked incomplete, so I added a cover. This is a remix of the "Filament Guide, Sensor, Cleaner & Cable management for the CR-10 with MK8 Aluminium Extruder" designed by Chito. I went ahead and removed a few features including the cleaner and shaved down a few areas to make it possible to print this in its natural orientation.
Statistics
Likes
13
Downloads
0