Mobula7 Case With Charger
Description
This is a case designed for the HappyModel Mobula7. The space on the right is designed to fit the 1s Battery charger that comes with the Standard version of the Mobula7. There is additional storage available underneath and behind the charger for all the tools/extra parts as well as 4 compartments around the quad for storing batteries. The case also has a window cut out of the side so the charger can be plugged in without being removed from the case. The bottom of the base has a brim built in so it can be placed on top of the lid when being used. There are 2 versions uploaded here, thick brimmed and thin brimmed. Make sure you print the corresponding lid/base pair. The "brim" refers to the slight indent on the top and bottom of the base where the lid slips around it. Some printers might have trouble printing the thick brim (2mm overhang on the base) with no supports. My ender3 had only minor issues with it and I recommend printing the thick brimmed version over the thin one if you can get away with it. UPDATE: Tested with the Beta75 Pro Frame, It will not fit the in the mobula7 case. I will add an adjusted base for the beta75. UPDATE 2: Added a version with slightly larger hole for the beta75 pro frame. Uses the same lid as the mobula7 case. UPDATE 3: Added an optional 3rd layer for extra storage with compartments. The AC adapter compartment is designed around this: https://www.amazon.com/gp/product/B06XQW36BL/ref=ppx_yo_dt_b_asin_title_o09_s00?ie=UTF8&psc=1 The optional 3rd layer should fit underneath the main compartment. Designed for the base with the thick brim. Tested it, and it fits.
Statistics
Likes
64
Downloads
0