Anet A8 FlaXis Bowden
Description
INTRODUCTION ----------------------- This upgrade will move extruder motor for bowden setup from top of the frame to the x-axis. The curvature of the tube from x-axis movement will stay consistent no matter what your z-axis height is. This will reduce the flex of ptfe tube thus making filament travel more smoother. BOM ------- 1 x M8 Bolt (40mm min.) 2 x M8 Nut 3 x M8 Washer 4 x M3 12mm Socket Head Cap Screw 2 x M3 20mm Socket Head Cap Screw 6 x M3 Nut 1 x Skateboard bearing (8x22x7mm) SUPPORT -------------- Support only needed on main-base.stl INFILL --------- All parts have been printed with 30% infill ASSEMBLING PROCESS ----------------------------------- Please refer to provided photos for assembling process. CREDIT ----------- The extruder was placed in a SnapFit Bowden Extruder Mount Anet A8 by hachiroku. I remix it and make a base so that M8 bolt can be fit on the rear of the extruder motor. VIDEO --------- https://www.youtube.com/watch?v=q21gmAqIHh4 UPDATES -------------- 1/1/2019 - Added 45mm-main-base.stl and 45mm-linear-rod-clamp.stl 10/1/2019 - Added 2020-mount-adapter.stl for 2020 aluminium extrusion
Statistics
Likes
152
Downloads
0